Mild Steel

A copper coated, G4Si1/ER70S-6 solid wire for GMAW of general structural and engineering unalloyed and low-alloyed carbon-manganese steels. Compared with OK Autrod 12.51, OK Autrod 12.64 has a slightly higher silicon and manganese content, which increases the weld metal strength. The high silicon content promotes low sensitivity to surface impurities and contributes to smooth, sound welds. The electrode may be welded with either a gas mixture or with pure CO2 as the shielding gas. OK Autrod 12.64 can even be delivered in the unique Esab Octagonal Marathon Pac, which is an excellent choice in mechanised welding applications.

A metal cored wire for robotic or automated welding of single and multi-pass fillet welds using M21 and M12 shielding gas. Used in the downhand and horizontal / vertical positions.

A general purpose metal cored wire for use with M21 shielding gas. Diameters less than 1.4mm are all-positional except vertical down.

A reliable, general purpose electrode for manual metal arc welding of carbon steels, carbon manganese steels and fine-grained carbon manganese steels with elevated yield strength. OK 48.00 deposits a tough, crack-resistant weld metal. The coating is of the low moisture absorption type. High welding speed in the vertical-up position. OK 48.00 is insensitive to the composition of the base material within fairly wide limits. The electrode can be used for welding structures where difficult stress conditions cannot be avoided. Tested according to NACE TM0177 and TM0284. Diffusible Hydrogen tested in various conditions show values below 3 ml/100g.

A multi-purpose all positional rutile cored wire for use with C1 or M21 shielding gas. Diameters less than 1.4mm are all-positional except vertical down.

A general purpose metal cored wire for use with M21 or C1 shielding gas. Diameters less than 1.4mm are all-positional.