Mild Steel

A multi-purpose all positional rutile cored wire for use with C1 or M21 shielding gas.

A metal cored wire which gives a very low amount of silica on the weld surface. Designed for welding thin plate (>1mm) as well as thicker sections.with argon / carbon dioxide shielding gas. The wider welding arc produced means larger gaps can be bridged than with solid wire.

General purpose rutile all-positional electrode with particularly satisfying results in the overhead welding of fillet welds, lap joints and sealing runs

Dual Shield II 711X is an all-position flux cored wire that displays exceptional impact properties in combination with CO2 shielding gas. This flux cored wire was developed to join low and medium carbon steels where higher impacts and toughness are required. As with all X Series wires, Dual Shield II 711X offers higher top-end current levels for out-of-position welding, broader operating ranges and higher deposition rates in out-of-position applications. ~Applications include construction, shipbuilding, rail car, light and heavy equipment, and general fabrication where exceptional impacts are required. Weld metal analysis is similar to Atom Arc 7018 and Atom Arc 7018-1.

A copper coated, G4Si1/ER70S-6 rod for GTAW of general structural and engineering unalloyed and low-alloyed carbon-manganese steels. Compared with OK Tigrod 12.61, OK Tigrod 12.64 has a slightly higher silicon and manganese content, which increases the weld metal strength. The high silicon content promotes low sensitivity to surface impurities and contributes to smooth, sound welds.

OK GoldRox is a true all-round and all-position rutile electrode. With exceptional arc stability and reduced spatter for decreased cleaning time, start and restart properties that allow for easy tack welds, and brilliant slag removal, novice and experienced welders can rely on OK GoldRox. Available in different package sizes – all fully recyclable – to make sure each pack fits specific job requirements.

Rutile coated electode designed for welding on flat position by the "contact" system on butt or filled joints; large amount of iron dust in coating, easy striking, high weld speed, beautiful finishing, high productivity.

General purpose basic DC+(-) electrode for mild and low alloy steels. Very good running characteristics give high quality welds with good impact values.

The non copper coated OK AristoRod 12.50 is a manganese-silicon alloyed solid wire for GMAW of unalloyed steels, such as general structural, pressure vessel, ship building and for fine-grained carbon-manganese steels for the same purpose with a minimum yield strength of max 420 MPa. The electrode can be welded with either a gas mixture or with pure CO2 as the shielding gas. The AristoRod wires are suitable for operating at high currents with maintained disturbance free wire feeding giving a stable arc with a low amount of spatter. OK AristoRod 12.50 delivered in the unique Esab Octagonal Marathon Pac is excellent in mechanised welding applications.

Agglomerated, aluminate-basic flux for Submerged Arc Welding. Very good surface finish and excellent slag detachability. Especially for concave horizontal fillet welds, as well for butt welds. High welding speeds. For general construction, beam fabrication, pressure vessels, pipe mills, transport industries, etc. Suitable for single and multi-wire procedures, for DC and AC. Due to the rather high Si-alloying intended for a limited number of passes and plate thickness up to about 25 mm.