A continuous solid corrosion resisting chroumium-nickel-molybdenium wire for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo types. OK Autrod 316LSi has a good general corrosion resistance, in particularly the alloy has very good resistance against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended where there is a risc of intergranular corrosion. The higher silicon content improves the welding properties, such as wetting. The alloy is widely used in the chemical and food processing industries as well as in ship building and various types of architectural structures.

‍

A metal cored 316L stainless steel cored wire for use with mixed shielding gas.

‍

‍

Exaton 19.12.3.LR is a chromium-nickel-molybdenum covered electrode with rutile coating for welding of low carbon, molybdenum alloyed, austenitic stainless steels of 316L (1.4436) type. Exaton 19.12.3.LR is used for welding steel of the types ISO: 1.4401, 1.4404, 1.4435, 1.4436, 1.4571 and ASTM: 316, 316L, 316LN, 316H and 316Ti. In cases where creep strength is of secondary importance, Exaton 19.12.3.LR is suitable for welding of corresponding stabilized austenitic steels. When a weld metal similar to the parent metal is not required, Exaton 19.12.3.LR can be used for welding ferritic and martensitic steels.

Exaton 19.9.LSi is a filler metal particularly suited for MIG/MAG welding but can also be used for plasma and hot wire TIG and mechanized TIG welding. It is suitable for joining stainless steels of the 18Cr/8Ni ELC-type and 18Cr/8Ni/Nb type for service temperatures up to 350°C (660°F).

‍

Bare corrosion resisting chromium-nickel welding rod for welding of heat resistant austenitic steels of the 25Cr-20Ni-type. The wire has a high Cr content and gives good oxidation resistance at high temperatures. Common applications are industrial furnaces and boiler parts as well as heat exchangers.

‍

FCAW wire for 18%Cr - 8%Ni stainless steel, For flat and horizontal position welding. Designed for welding types 301, 302, 304, 304L, 308, 308L steels. Ideal where service temperatures are below 500°F(260°C). Low carbon content helps minimize carbide precipitation. Carbon content 0.04% maximum.

A metal cored 307L stainless steel cored wire for use with M13 shielding gas.

‍

Bare corrosion resisting "Super Duplex" rods for welding of austenitic-ferritic stainless alloys of 25% Cr, 7% Ni , 4%Mo, low C types. OK Tigrod 2509 has high intergranular, pitting and stress corrosion resistance. The alloy is widely used in applications were corrosion resistance is of outmost importance. Pulp & paper industry, offshore and gas industry are areas of interest.

‍

FCAW wire for low carbon 18%Cr - 12%Ni – 2%Mo stainless steel for all-position welding. For welding type 316 stainless. Contains molybdenum which resists pitting corrosion induced by sulphuric and sulphurous acids, chlorides and cellulose solutions. Used widely in the rayon, dye and paper making industries. Carbon content 0.04% maximum.

‍

Bare corrosion resisting chroumium-nickel-molybdenium rods for welding of austenitic stainless alloys of 18% Cr-8% Ni and 18% Cr-10% Ni-3% Mo types. OK Tigrod 316LSi has a good general corrosion resistance, in particularly the alloy has very good resistance against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended where there is a risc of intergranular corrosion. The higher silicon content improves the welding properties, such as wetting. The alloy is widely used in the chemical and food processing industries as well as in ship building and various types of architectural structures.

‍

FCAW wire for 18%Cr - 8%Ni – Nb stainless steel. For all-position welding. Developed to weld types 347, 304, 304L and 321 stainless. The addition of Niobium helps minimize chromium carbide precipitation while providing improved corrosion resistance.

‍

A metal cored wire alloyed with 17%Cr and 1% Mo used with M21 shielding gas.

‍

Exaton 25.22.2.LMn is a manganese alloyed chromium-nickel-molybdenum filler material used for welding UNS S31050, EN 1.4466, (e.g. Alleima® 2RE69). The weld deposit has excellent low temperature toughness that makes it suitable for joining stainless steels for cryogenic service. Exaton 25.22.2.LMn has extensively been used successfully in all critical high-pressure units of modern urea processes, such as: Stripper tubes - Stamicarbon, Montedison IDR Outerlayer of bimetallic (stripper tubes) - Saipem Ferrules - All processes Carbamate condensers - All processes Decomposers - Montedison Reactor coils - UTI Exaton 25.22.2.LMn has also found extensive use in other corrosive environments in fertilizer plants, such as: – Nitric acid cooler/condensers cooled with polluted cooling water – Heating coils and pipe in NPK plants – Norsk Hydro process

‍

FCAW wire for 18%Cr - 8%Ni stainless steel, For flat and horizontal position welding. Designed for welding types 301, 302, 304, 304L, 308, 308L steels. Ideal where service temperatures are below 500°F(260°C). Low carbon content helps minimize carbide precipitation. Carbon content 0.04% maximum.

‍

A continous solid corrosion resisting chromium-nickel-manganese wire for welding of austenitic stainless alloys of 18% Cr, 8% Ni, 7% Mn types. OK Autrod 16.95 has a general corrosion resistance similar to that of the corresponding parent metal. The higher silicon content improves the welding properties, such as wetting. The product is a modified variant of ER307, basically with a higher Mn content to make the weld metal less sensitive to hot cracking. When used for joining dissimilar materials the corrosion resistance is of secondary importance. The alloy is used in a wide range of applications across the industry such as joining of austenitic, manganese, work hardenable steels as well as armourplate and heat resistant steels.

‍

A metal cored wire for the fabrication and repair of Pelton and Francis wheels and other water turbine components in 13%Cr 4%Ni alloyed soft martensitic steels used with M12 or M13 shielding gas.

Exaton SX is a high silicon containing austenitic stainless steel wire for joining grades, such as UNS S32615 (e.g. Alleima® SX). The wire is developed for use in concentrated sulfuric acid and in high concentrated nitric acid. Exaton SX GTAW is used for joining and overlay welding.

‍

FCAW wire for 22%Cr - 12%Ni stainless steel. For all-position welding. Designed for welding type 309 wrought or cast forms, but used extensively for welding type 304 to mild or carbon steel. Also used for welding 304 clad sheets and for applying stainless steel sheet linings to carbon steel. Carbon content 0.04% maximum.

FCAW wire for 18%Cr - 8%Ni stainless steel, For all-position welding. For welding types 301, 302, 304, 304L, 308 and 308L of stainless steel. May be used for welding types 321 and 347 if service temperature does not exceed 500°F(260°C). Low carbon content minimizes carbide precipitation. Ferrite values will lower as impact toughness increases. Carbon content 0.04% maximum.

Bare corrosion resisting chromium-nickel rods for welding of austenitic chromium nickel alloys of 18% Cr 8% Ni-type. OK Tigrod 308LSi has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended were there is a risk of intergranular corrosion. The higher silicon content improves the welding properties, such as wetting. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers.

‍

‍

A continous solid corrosion resisting "Super Duplex" wire for welding of austenitic-ferritic stainless alloys of 25% Cr, 7% Ni, 4% Mo, low C types. OK Autrod 2509 has high intergranular, pitting and stress corrosion resistance. The alloy is widely used in applications were corrosion resistance is of outmost importance. Pulp & paper industry, offshore and gas industry are areas of interest.

‍

FCAW wire for 22%Cr - 12%Ni stainless steel For flat and horizontal position welding. Developed to be used when welding most mild or carbon steels to type 304. The higher percentages of Cr and Ni provide the necessary crack resistance. Carbon content 0.04% maximum.

‍

Bare corrosion resisting chromium-nickel welding rod for welding of similar steels of 24% Cr, 13% Ni types. The alloy is also used for welding of buffer layers on CMn steels and welding of dissimilar joints. When using the wire for buffer layers and dissimilar joints it is necessary to control the dilution of the weld. OK Tigrod 309L has a good general corrosion resistance. When used for joining dissimilar materials the corrosion resistance is of secondary importance.

‍

Bare corrosion resisting chromium-nickel rods. OK Tigrod 308L has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended were there is a risc of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type with low carbon content and Nb-stabilized steels of the same type if the service temperature will not exceed 350°C. Can also be used for welding of Cr-steels except in sulphur rich environments.

‍

OK Autrod 347Si is an austenitic stainless steel filler material for welding of stainless steel alloys of 18Cr/8Ni/Nb and 18Cr/8Ni/Ti types where good general corrosion resistance is required. The alloy is stabilized with Niobium to improve the resistance against intergranular corrosion of the weld metal. The higher silicon content improves the welding properties, such as wetting. Due to the niobium content the alloy is recommended for use at higher temperatures.

‍