Hard Facing

Stoody CP-2000 is designed to produce a high concentration of uniformly distributed small primary chromium carbides in an austenitic matrix. The formulation is optimized for superior weldability in single and multiple layer applications. CP-2000 exhibits improved wear resistance and toughness over conventional chromium carbide alloys.

Nicromang deposit is a typical 13 - 16% manganese steel alloy with additions of chromium and nickel to improve its weldability and physical properties. It is primarily used for build up, repair, and joining of manganese steels.

Stoody HB-56 is a general purpose non-cracking hardbanding alloy that offer high hardness in a casing friendly deposit. HB-56 offers a balance of impact and abrasion resistance and can be applied to carbon and low alloy steels with or without tungsten carbide addition. Deposits are crack free when applied over new or properly rebuilt tool joints using appropriate preheats.

Stoody Horseshoe Borium was developed to provide a maximum non-slipping surface when applied to horseshoes. It is manufactured by metering relatively large tungsten carbide particles into steel.

Stoody 117 deposit consists of uniformly dispersed chromium carbides in a semi-austenitic matrix that provides a deposit with good impact, abrasion, and anti-galling properties. It develops a light crosschecking patter which allows this material to be applied in multiple layers without difficulty.

Stoody Build-Up is a low alloy wire with deposits exhibiting excellent compressive strength and resistance to plastic deformation. Build-up is a perfect choice for use as a buffer or build up layer to be covered by subsequent overlay hardfacing. Work hardens under impact.

Stoodite 6-M is the most widely used cobalt alloy with excellent resistance to many forms of mechanical and chemical degradation over a wide temperature range. Stoodite 6-M attributes include its outstanding self mated anti-galling properties, high temperature hardness, and high resistance to cavitation erosion. Certification to AWS specification - A5.21 ERCCoCr-A

Stoody 964-G deposit is a specially formulated wear resistant alloy which produces a uniform distribution of small primary carbides in a martensitic matrix. The small carbides provide greatly improved wear resistance over martensitic steel, many tool steels, and some conventional chromium carbide alloys. Stoody 964-G possesses excellent resistance to impact and plastic deformation. Deposits are crack free on carbon 300 stainless and manganese steels. Other base metals should be preheated and post heated appropriately. The material is characterized by a high hardness and excellent wear resistance and is recommended for parts where cross checking is undesirable. Stoody 964-G offers improved weldability over chromium carbide and many other tool steel welding wires.

Stoody 964 AP-G is a gas shielded flux cored general purpose hardfacing wire. Deposits from this all-position wire provide exceptional wear resisteance and high hardness. On Series 300 stainless and manganese steels, deposits are crack free. Other base metals should be preheated and post-heated appropriately. Stoody 964AP-G provides improved weldability over chromium carbide and many other tool steel welding wires. Use 964 AP-G where cross checking is undesirable.

A cored wire which produces a Cr-Mo-V-Co-W alloyed weld metal for hardfacing used with C1 shielding gas.