Reliable Equipment and Accessories for Industrial Performance

iSeries High-Precision automated plasma cutting power sources offer unprecedented profitability and performance, increasing cutting efficiency with outstanding cut quality, narrow kerf widths and a smooth cut surface. Integrated control of torch consumables, gas flow and cutting parameters results in ISO 3 cut quality or better.Plasma power supplies are available with 200 -800 A cutting power for cutting up to 160 mm (6.25 in.).Dedicated process technologies for mild steel, stainless steel, and aluminium cutting ensure consistent, high quality results at fast cut speeds.The iSeries offers reliability you can depend on with improved cooling, robust electronics and discrete components that are easy to maintain and service.

ESAB m2 200iEasy-to-use, 200 amp mechanized plasma system for production cutting of mild steel, stainless steel and aluminum. Manual Gas Control allows plasma and secondary gas pressures to be precisely controlled at the power supply with individual regulators. Plasma gas can either be Air, Oxygen, Nitrogen, or Argon- Hydrogen (manual change required).Lower Cost per PartHigh cutting speeds and cut quality with minimal dross, reduced warping and a small heat-affected zone results in fewer secondary operations further reducing the overall costs of production. Use air plasma gas for the lowest possible cost per part, choose oxygen or nitrogen when the application demands higher cut quality.Superior ReliabilityA full 100 percent duty cycle enables the system to handle the most demanding production requirements with the highest reliability. The SpeedLok design of the m2 200i torch provides the fastest consumable change in the industry and concentricity for repetitive cut quality.

Designed for both Single (AC or DC) and Tandem (DC/ AC or AC/AC) wire welding in parallel or almost parallel joints, ranging in width from 18 mm and in depth down to 350 mm.The HNG Multi meets the demands for a fully automatic welding process with accurate controlling of all parameters for reduced welding times and perfect weld metal when welding high-tensile material. HNG Multi is suitable for continuous operation under heavy conditions -with preheated welding objects still maintaining the same high precision and wear characteristics.

This heavy duty system cuts up to 3/4" (19.1 mm) or 8" (203.2 mm) with optional tips. It welds up to 3" (76.2 mm) with optional nozzles on acetylene models

Highly stabilized manipulation of welding torches with optimized welding results

‍

Aristo^® TA4 is a one knob panel for setting and adjustment of current. 3 soft buttons provides setting and adjustments of Arc force, Hot start, gas pre/post flow, Slope up/down, HF/Lift Arc and 2/4 stroke.Aristo^® TA6 is a more sophisticated panel with additional possibilities:Choice of electrode type, gas purge, memory of 10 welding parameters and pulse TIG.Inclusive for both panels is a digital display for A/V measurement.Water cooling unitAristo^® Tig 4000iw includes a water cooling unit to accept the use of a water cooled TIG torch.Robust and PowerfulAristo^® Tig 4000i is a ideal partner when it comes to efficient production indoors or outdoors, installation on site or all type of repair & maintenance welding.The power source is a compact and sturdy piece of equipment with a chassis made of extruded aluminium sections: Alutech^™. This is a robust material that withstands rough treatment.The power source is based on inverter IGBT technology that provides reliable equipment with outstanding welding characteristics.The communications and control CAN-bus system means less cables, which in turn increases operational reliability.MMA ApplicationsAristo^® Tig 4000i can weld most metals to alloyed and non alloyed steel, stainless steel and cast iron. Electrodes up to 6 mm and Gouging electrodes up to 8 mm.FlexibilityThe fundamental part is the 400 A power module. The link between man and machine is the communicator. You can choose between 2 control panels (MMC) depending upon your requirements and demands. Both of them are clear, easy to understand and to operate.

The A2S Mini Master is a versatile welding system for single wire SAW, twin wire SAW or GMAW. The light-weight, compact design allows for greater flexibility.

‍

Light duty cutting attachment - may use any fuel gas with proper cutting tip.

The Rogue is a robust and durable power source for the professional welder. The machine provides state-of-the-art welding performance and reliability through use of the latest high performance power electronics and Digital control; ensuring a precise consistent arc.The Rogue provides a smooth DC (Direct Current) welding power which allows you to weld a variety of metals, such as alloyed and non alloyed steel, stainless steel, and cast iron. The Arc Force and Hot Start settings are adjustable and help the user find exactly the right arc for the job. Being digital the Micro-processor precisely controls all functions and provides Best-in Class welding performance across the amperage range of the machine. The Rogue can be used with electrodes up to 4.0mm Ø.The Rogue can easily perform TIG -welding using a “Live TIG” start. Equip the power source with the optional TIG-Torch, which has a built-in gas valve and a regulator, and a bottle of gas and you are ready to weld mild steel or stainless steel, with or without filler material.

For excellent results welding longitudinal and circumferential butt joints inside tubes.

‍