Reliable Equipment and Accessories for Industrial Performance

• Adaptive optimized Pulse MIG process that compensates for operator variation with an easy, user-friendly setup designed to achieve excellent weld results
• Fit for purpose WeldMode SPEED that provides a focused arc that allows the welder to better and easier handle the weld puddle at higher travel speeds increasing the productivity
• Optional cooling unit
• Integrated WeldCloud connectivity

PEK is a system adapted for use with ESAB’s automatic power sources LAF 631/1001/1251/1601, TAF 801/1251, and Aristo^® 1000 AC/DC. The control system is connected to the power source via a control cable and incorporates a CAN bus system for data transfer.

PEK can also be used as a motion controller to integrate other power sources for mechanisation and automation.

The control system is easy to use thanks to its clear text menu. Users can choose between a large number of different languages. The large display keeps the user informed about the main parameters including current, voltage and travel speed. Parameter sets can be given names for easier assignment.. Five soft keys can be configured according to individual preferences. PEK supports your system’s maintenance and keeps track of its use.

ESAB standard motors and travel axis can be selected from a list, and other motors can be programmed manually.

Pre-settings
PEK can easily be pre-set by the user. Manual control keys for wire feed and travel direction allow fast access to frequent settings. Turn knobs allow easy adjustment of wire feed speed, voltage and travel speed during the process.

Additional functionality
More functions are available by adding an external analogue or digital interface.

Welding parameter limits
PEK allows defined limits for the settings and the measured parameters. The welder will be alerted if the weld parameters are outside the allowed limits.

Makes welding safer and easier
A USB slot enables users to file all settings and configurations. Restore your valuable production data within minutes. Security is provided by three-level user accounts. Users can also transfer welding parameters between other PEK units.

Emergency stop button
The emergency stop button can also be used in an extended E-stop chain.

The SDE range of drying and storing ovens are large, thermally controlled cabinets designed specifically for welding electrodes. Ideally, a facility should have separate ovens for drying and storing. However with the SDE manual digital thermostat the same oven can be used for both drying and storing. Designed for stationary applications these come with heavy lockable castors to move around then lock in place. Additionally a gas vent safely removes humidity and gases during the heating process.Heavy insulation, rugged industrial design, external surfaces with electrostatic paint coating and heavy lockable castors make these ovens a great investment for long-term easy use.

Fabricator ET 410iP is a heavy-duty inverter-controlled power source for HF TIG Pulse welding and MMA (Stick) welding.The Fabricator ET 410iP is built to withstand rugged use, making it a perfect solution for industrial usage. Ideal for heavy industries.

The versatile VCM 200/201 kits have a tractor machine that can be used on its own track for straight line cutting and a variety of welding operations. Off track and with a radius rod assembly, the VCM 200 can also be used for circle cutting

For industrial production with good profitability, the mechanization is the answer. CaB 300S might be the solution to increase the profitability on your welding. A proven product has been further improved.

The ESAB SDF range of drying and storing ovens are large, temperature-controlled cabinets for welding powder flux in a typical industrial operation. They are designed for convenient top loading and bottom removal of welding flux. The easy-to-use digital controller sets and regulates the temperature over a wide range for baking, drying, and storing. Electric heaters embedded inside walls evenly heat the flux without agitation or flux turning.Heavy insulation, rugged industrial design, external surfaces with electrostatic paint coating and heavy lockable castors make these ovens a great investment for long-term easy use.

Sturdy compact flux recovery systems

The Combirex CS is a rugged 3-axis heavy-duty gantry design for smooth, accurate motion, delivering high quality cutting performance. With high speed AC drives and a high speed plasma lifter, you can achieve higher productivity and high quality plasma cutting. Equipped with one plasma and one oxy-fuel torch, the Combirex CS can cut a wide range of materials. The Combirex CS comes equipped with ESAB’s iCNC Performance controller, with integrated ProMotion Nest software and Cut Cost Calculator.

EFU 30 and EFU 30 IB are dedicated units to be used in a growing line or when joining cans together.They have a smart and robust design made of high-quality key components, including electrical cylinders, as well as high-load polyurethane rollers.