Reliable Equipment and Accessories for Industrial Performance

The reliable multi-process welding equipment designed for heavy duty productivity now with an output of up to 850 amps.

The GMH joint tracking controller, together with ESAB servo slides and a sensor unit forms a robust and easy to use joint tracking system for automatic welding.

GMH
The GMH system minimizes repair welding and adjustments after welding thanks so that the arc is always in the optimal position. The general quality will be kept on an even level and the operator does not need to focus on the weld head and its position.

The operator can then keep an eye on the entire installation and contribute to a non-interrupted welding production by adding flux and prepare for changing the wire spool well in advance.

System contents
The welding head is mounted on a motorised double servo slide where the head can be moved up-down and left-right. The sensor is the most vital part in the system which gives information to the control system how to adjust the slides to keep the arc in the optimal position. There are a number of different mechanical sense fingers for different applications. Inductive sensors can also be used.

Operation
The operator uses the joystick to guide the welding head and mechanical sensor finger into correct position. No programming at all is required. The unit is set in track mode and the welding can start.

Curved details can as long as they are within the working range of the servo slides be welded fully automatic with GMH as the guiding tool.

GMH is available in three versions:

With control panel on the front
Suitable for ESAB’s A2 / A6 tractor automats and A2 / A6 beam travelling carriage. Automatic solutions with short distance between welding head and GMH control box and where the operator has a good overview of weld joint and welding head without moving around.

With remote control (no control panel on the front)
Suitable for Column & Booms and large automatic installations with long distance between welding head and GMH control box and when the operator must move around in order to get a good view of the welding joint.

Without control panel and remote control
Suitable for customized solutions where the customer’s own remote control is adapted to the GMH control box.

A6S Arc Master is the complete system for heavy SAW production welding offering flexibility, operational reliability and durability. The system is available in a number of standard models and can be adapted to suit the customer’s specific demands.

Origo ™ Arc 455 is a direct current welding rectifier for manual welding of a wide range of coated electrodes. Easy to operate, it is ideal to use in production, maintenance and metalworking applications.

iSeries High-Precision automated plasma cutting power sources offer unprecedented profitability and performance, increasing cutting efficiency with outstanding cut quality, narrow kerf widths and a smooth cut surface. Integrated control of torch consumables, gas flow and cutting parameters results in ISO 3 cut quality or better.Plasma power supplies are available with 200 -800 A cutting power for cutting up to 160 mm (6.25 in.).Dedicated process technologies for mild steel, stainless steel, and aluminium cutting ensure consistent, high quality results at fast cut speeds.The iSeries offers reliability you can depend on with improved cooling, robust electronics and discrete components that are easy to maintain and service.

Cutmaster 70+ is the perfect combination of power  and portability for hand-held plasma cutting machines. Plus means more, so we’ve added a user-friendly 10.9 cm TFT LCD screen and upgraded features that give you even more control and flexibility to master any cut up to 30 mm. Together with the SL60 1Torch, it all adds up to the total plasma cutting package.Pierce Capacity: 20 mmCutting Capacity: 30 mmMaximum Severance: 38 mmResults may vary based on material used.

A6 Mastertrac A6TF Tandem is a self-propelled, 4 wheel-drive, automatic welding machine suitable for heavy production welding with capacity for up to 6 mm (0.24 in.) wire using 1500A DC or AC current.

For optimum productivity

Medium duty cutting attachment - may use any fuel gas with proper cutting tips.

‍

• Adaptive optimized Pulse MIG process that compensates for operator variation with an easy, user-friendly setup designed to achieve excellent weld results
• Fit for purpose WeldMode SPEED that provides a focused arc that allows the welder to better and easier handle the weld puddle at higher travel speeds increasing the productivity
• Optional cooling unit
• Integrated WeldCloud connectivity